It was about time to give a new paintjob to my main SRS, added new parts and the old paint worn off mostly… Here I will show you some techniques I use most of the time on my rifles and gear. The paints I used were Belton Molotow. The colors are the following: -Camouflage /ranger […]
Here comes a quick mini review of the SparkLabs WOLF HPA engine with a short build log to install in a VFC Mp7 aeg. I will try to provide links and advices to most of the build. I can not write and extensive review of the engine yet, only spent ~3000 rounds through it. What […]
Here is my current kitlist and build of Mk23. I will try to provide links for the pieces I use, othe than parts with obvious or multiple sources. I personally use my Mk23 50-50 with my SRS, so maxing it out makes a perfect sense to me. Keeping it in mind, if you only use […]
Here is my custom built HPA AEP. This is DIY project, with a whole lot of quick and dirty solutions, which seem to work rather well so far. The main point was to build the ultimate secondary with the following points: -as or more silent than my Mk23 -as accurate as my Mk23 -smaller than […]
Almost finished building my Tac-41 LS which is dedicated for night time use. To clarify why it is built this way a few details about the rules of local night games. Almost all night games limit the muzzle energy to 1.5J, so high energy snipers are not allowed. The second thing is that almost all […]
This post will not cover the basics of haloscreen and pattern composition, it’s really just small bits of advices and tricks to make your life easier. First thing is, prep your fabric pieces in bulk. Ideally you buy your halo in sheets. First is cut of the edge all along where the mesh woven dense […]
Always wanted to post my setup when it’s the ‘final’ version. Had to realise that there is no such thing, as it is constantly changes and evolves even game to game… I will post time to time when some significant changes are done on it. So here is my chestrig setup fron the latest game […]
Stage of the SRS in early 2024. Deceided to write a detailed update post on what my build is exactly at the moment.Had to realise that it would be to massive to write in one single post, so I will split it up into pieces.First part is the externals, next is the hopup area.Part 1.: […]